Página 1 de 1

Securing Nissan brick for airport or other public charging

Enviado: 04 mar 2013, 23:17
por ruimegas
Securing Nissan brick for airport or other public charging

Onde é que eu já vi uma cena destas...terá sido com o Filipe ;)

"OK I have not seen this yet so here is my method:

Lay the brick behind the battery

[IMG]http://i1232.photobucket.com/albums/ff3 ... -13042.jpg[/IMG]

Lay the coiled cord toward the front

[IMG]http://i1232.photobucket.com/albums/ff3 ... -13045.jpg[/IMG]

Insert J connector and lay the cord snug in the front corner along the weatherstrip

[IMG]http://i1232.photobucket.com/albums/ff3 ... -13043.jpg[/IMG]

Draw the extension cord same along the other side and close the hood

[IMG]http://i1232.photobucket.com/albums/ff3 ... -13047.jpg[/IMG]

Side view ready to plug in

[IMG]http://i1232.photobucket.com/albums/ff3 ... -13048.jpg[/IMG]

The extension cord shown I believe was #16 wire. After close to an hour the wire was fine but the connectors became very hot. It is an old cord and probably worn connectors. My #12 wire extension cord fit the slot just fine so I have to recommend the heavier cord. I have used this HD cord for 6 hours continuous with no heat issues."

Em: http://www.mynissanleaf.com/viewtopic.php?f=38&t=7587

Re: Securing Nissan brick for airport or other public chargi

Enviado: 17 ago 2016, 19:35
por pemifer
Os meus cabos são demasiado grossos para isto.
Optei por isto
http://www.nissanleafpt.com/viewtopic.p ... 646#p77638